I am trying to save ANLDE system (set of ANLDE systems) but
browser doesn't open corresponding window with the system as described in
documentation. Why?
Answer:
The Web-SynDic system uses pop-up windows for saving ANLDE
systems. Your browser probably blocks pop-up windows. Enable pop-up windows
and try again.
Question:
Sometimes Maximum process virtual size in Solution
report is ``N/A''. Why?
Answer:
The Web-Syndic system uses external programs for collecting
resource usage information. These programs read solver process system
information, which should be updated at least one time. So,
if solver executes too fast the information is not updated.
If you still want to know Maximum process virtual size you may try to solve
the system several times until this information is obtained.
Question:
I am trying to solve a set of ANLDE systems, but the solver
fails. How can I solve this set anyway?
Answer:
At present the Web-SynDic system doesn't support detailed error
messages for ANLDE system sets. You may try to solve each ANLDE system
separately and manually remove unsolvable system from the set.
Question:
What does ``there is an ANLDE system already in
processing'' warning mean?
Answer:
The Web-SynDic can process no more than one ANLDE
system (or set of systems) for a user at the same time. So after you
have requested generating or solving a system you can not send new
requests until the processing of the previous system is finished.
Question:
Why does my task spends so much time waiting in
solving and generation queues?
Answer:
The Web-SynDic does not solve or generate ANLDE systems
concurrently. So if there are many users processing ANLDE systems
your task will be added to the end of queue and will wait until all
previously requested processings are finished. You may see the number of
queued tasks in the ``Server Load'' section of the left-hand panel
on any page of the web system.
Question:
Why I may want to register in the web system?
Answer:
Your algorithms configuration values will be saved on
server and restored every time you log in. Also we will be able to
identify notes sent by you.
Question:
How can I register in the Web-SynDic system?
Answer:
You should click Register button of the Log in
form and fill all necessary text fields with your information.
Then press Register button in the User registration form.
If all text fields are filled correctly and "Registration successful" message
is displayed you become a registered user.
Question:
How can I contact the Web-SynDic team?
Answer:
You may click Web-SynDic Team hypertext link
at the bottom right corner of any page of the web system. Detailed contact
information should be displayed on the Web-SynDic Team page.
Question:
I want to generate and solve set of ANLDE systems. I
follow link Set of ANLDE systems and press Generate&Solve button. The system successfully finishes
generation process, but after that ``Buffer is full. Task
rejected.'' error message is shown. What is happening?
Answer:
The Web-SynDic system uses two independent spoolers for
generating and solving ANLDE systems correspondingly. Each spooler
may process only one task at the moment and store limited number of
other tasks (ANLDE systems or system sets for processing) in its
buffer. After generating ANLDE system set the Web-SynDic system
tries to put generated set into the solver spooler queue. Thus, if
the solver spooler buffer is already filled with other users' tasks,
the corresponding error message is returned to you. This error is
not fatal. Moreover, after waiting for a while you can press
Reload button of your browser, and the generated system set
will be put into solver spooler queue if it has available space.
Question:
I have logged in as the system administrator, and I want to
manage users. I follow Manage Users link and see form which
prompts me to enter user nickname. Is it possible to get a list of all
users in the Web-SynDic system?
Answer:
The list of all users is currently unavailable. This feature
will be added in future releases. In this version you have to enter user
nickname manually.
Question:
I have logged in as the system administrator, and I want to
get activity statistics report. I follow Activity Statistics
link, set IP address as a report domain, and press Get Report
button. After getting report some fields in the ``IP address/Host'' column
contain only IP addresses. Why?
Answer:
Sometimes it is possible to get only IP address of host, not
the full host name. In this case only IP address is displayed in the
corresponding column of the report.
Question:
I solved correct ANLDE system. But when I press button Back I get
the page with error message. Why?
Answer:
It seems that before you tried to solve wrong ANLDE system or previous
solved process was fail. The page with error message automatically stored in your browser
cache and when you press button Back the browser gets it from cache content.
Also each ANLDE system or ANLDE system set has unique ID. And when your browser
tried to get old ANLDE system, the Web-SynDic system should return error message.
Note. The current ANLDE system is stored in Web-SynDic session content.
So, if you want to use it again just follow the link ANLDE system.